Inhoudsopgave
Advertenties
INSTRUCTION MANUAL VOSS.FARMING PROFICUT GO
3. To achieve best tension between the clipper blades, turn a
further 1/4 turn at the most.
Info
»
If the clipping result worsens, the tension between
the blades is no longer correct. Switch off the device
and turn the adjusting screw (2) for 1/4 turn to restore
the tension.
»
If the clipping result does not improve after adjusting
the tension, the clipping blades must be sharpened.
Contact a specialist for this.
7.3
OILING THE BLADES
Oiling your device is essential for the best result. It also prevents
overheating and significantly prolongs the life of the blades and
the device. To do this, there must be a constant, thin film of oil
on the moving parts of the head.
CAU TI ON
Be careful to keep your fingers away from the
sharp sides of the blades to avoid injury.
To oil the blades, drip the oil onto the blades and into the opening
every 10 minutes (Fig. 2).
N OTI CE
»
Make sure that the blades do not run dry.
»
Only use special clipper oil.
7.4
CHANGING BATTERY
1. Switch off the clipper.
2. To release the battery (4), squeeze the battery lock (5) on
both sides of the clipper (Fig. 3).
3. Carefully pull out the battery (4) (Fig. 4).
4. Insert the new battery (4).
WAR N IN G
Do not use force during insertion to avoid
damaging the battery and the device.
As soon as the battery is correctly inserted in the device, you
will hear a click.
85345 - 02.2024 - V4
Loosen
Tighten
Fig. 1
Fig. 2
Fig. 3
Fig. 4
DE
EN
FR
IT
NL
SV
ES
PL
21
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
