Download Inhoudsopgave Inhoud Print deze pagina

Tips And Recommendations For Use; Questions About The Oximo; Detecting Obstacles; Technical Data - SOMFY Oximo 40 io Handleiding

Verberg thumbnails Zie ook voor Oximo 40 io:
Inhoudsopgave

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 73
EN

3.6. TIPS AND RECOMMENDATIONS FOR USE

3.6.1. Questions about the Oximo ?

Observations
The motorised
product does not
operate.
If the motorised product still does not work, contact a motorisation and home automation professional.

3.6.2. Detecting obstacles

Automatic obstacle detection makes it possible to protect the
roller shutter apron and clear away obstacles:
If the roller shutter apron comes up against an obstacle
-
when moving down then, depending on the position of the
obstacle:
• Either the roller shutter stops automatically.
• Or it stops and is raised again automatically.
If the roller shutter apron encounters an obstacle when
-
moving upwards, the roller shutter stops automatically.
3.6.3. Frost protection
Frost protection functions in a similar way to obstacle detection:
If the motorised product detects resistance, it stops automatically to protect the roller shutter
-
apron: The roller shutter remains in its initial position.
3.6.4. Replacing a lost or broken Somfy control point
To replace a lost or broken control point, contact a motorisation and home automation professional.

4. TECHNICAL DATA

Power supply
Radio frequency
Frequency range and max power used
Operating temperature
Index protection rating
Safety level
Maximum number of associated control points
and sensors
Somfy SAS, F-74300 CLUSES as manufacturer hereby declares that the drive covered by these instructions when
marked for input voltage 230V~50Hz and used as intended according to these instructions, is in compliance with the
10
Possible causes
The control point battery is weak.
The motorisation is in thermal
protection mode.
Images not contractually binding
Check whether the battery is weak and
replace it if necessary.
Wait for the motor to cool down.
230 V
868-870 MHz io homecontrol® two-way Tri-band
868,000 MHz - 868,600 MHz e.r.p. <25 mW
868,700 MHz - 869,200 MHz e.r.p. <25 mW
869,700 MHz - 870,000 MHz e.r.p. <25 mW
- 20°C à + 60°C
Copyright © 2016 Somfy SAS. All rights reserved
Solutions
50 Hz
IP 44
Class II
9

Advertenties

Inhoudsopgave
loading

Inhoudsopgave