Download Inhoudsopgave Inhoud Print deze pagina

Pre-Programming The Control Point; Setting The End Limits - SOMFY Oximo 40 io Handleiding

Verberg thumbnails Zie ook voor Oximo 40 io:
Inhoudsopgave

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 73
2.3. COMMISSIONING

2.3.1. Pre-programming the control point

1) Switch on the power supply.
2) Press the Up and Down buttons on the control point at the
same time: The motorised product moves up and down (fast
raising and lowering), and the control point is pre-programmed
in the motor.
2.3.2. Checking the direction of rotation
1) Press the Up button on the control point:
a) If the motorised product rises (a), the direction of
rotation is correct: Move onto the section entitled "Setting
the end limits".
b) If the motorised product lowers (b), the direction of
rotation is incorrect: Move onto the next step.
2) Press the my button on the control point until the motorised
product moves up and down: The direction of rotation has
3) Press the my button until the motorised product moves up
and down.

2.3.3. Setting the end limits

Setting the end limits in automatic mode (2.3.3.a)
1) Press the Up and Down buttons on the control point at the
same time: The motorised product moves up and down (fast
raising and lowering).
2) Press the my button until the motorised product moves up
and down.
Setting the end limits in manual mode (2.3.3.b)
The end limits can be set in any order.
1) Raise the motorised product to the desired position by
pressing the Up button.
2) Press the my and Down buttons at the same time until the
motorised product moves.
The upper end limit is memorised.
3) Press the my button when the motorised product reaches
the desired lowered position. If necessary, adjust the position
of the motorised product using the Up and Down buttons.
4) Press the my and Up buttons at the same time until the
motorised product moves.
The lower end limit is memorised. The motorised product
rises and stops in the raised position.
motorised product moves up and down.
The end limits are programmed.
Copyright © 2016 Somfy SAS. All rights reserved.
my button until the
Images not contractually binding
1
2
ON
1
Setting the
a
end limits
b
Move onto
the next step
2
3
1
2
1
2
4
3
5
EN
5

Advertenties

Inhoudsopgave
loading

Inhoudsopgave