Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
EN
2.3. COMMISSIONING
Identifying the steps to be performed
The settings for the end limits depend on the type of roller shutter:
For a roller shutter
with rigid links
and with stops
No setting to be performed: the
end limits are set automatically.
Check that the roller shutter
and its accessories are
Please consult the roller shutter
manufacturer or Somfy for
information on the compat-
ibility of the drive with the
roller shutter and its accessories.
Step 3 :
Automatic Setting of
end limits(2.3.3.a)
4
Step 1 : Preprogramming the control point(2.3.1)
Checking the direction of rotation
Step 2 :
For a roller shutter
without rigid links
and without stops
The upper and lower end limits
must be set in manual mode.
Setting / resetting
of end limits in manual
mode (2.3.3.b)
Step 4 : Programming the control point (2.3.4)
Images not contractually binding
Step 3 :
USE
Copyright © 2016 Somfy SAS. All rights reserved
(2.3.2)
For a roller shutter
without rigid links and
with stops or with rigid
links and without stops
The upper and lower end limits
must be set in semi-automatic
mode.
Step3 :
Setting / resetting
of end limits in
semi-automatic
mode(2.3.3.c)
Advertenties
Hoofdstukken
Inhoudsopgave
