Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Electrical connections
L-N
Power supply 230V (AC) 50/60 Hz
10-11 Terminals for powering 24V (AC) accessories
10-E1 Movement fl ashing light (socket rating: 24V - 25W max.)
10-5
Open gate indicator-light (socket rating: 24V - 3W max.)
2-C1 Re-open during closing (NC) contact
2-C3 «partial stop» (NC) contact
2-C7 «Open while closing»(NC) contact "sensitive edges"
2-C8 «Close while opening» (NC) contact "sensitive edges"
M-N
24V (DC) motor with encoder
Electrical connection to operate the photocells' safety test
(DOC)
The data and information reported in this installation manual are susceptible to change at any time and without obligation on CAME cancelli automatici s.p.a. to notify users.
F-FA
Opening limit switch
F-FC
Closure limit switch
1-2
Stop button (NC) contact
2-3P Keyswitch and/or partial opening button (NO)
2-7
Commands button (NO)
B1-B2 Possible output of the radio receiver's second channel (NO).
Socket rating: 5A-24V (DC).
Connection of antenna
- Set DIP switch 7 to ON to activate the test.
(DIR)
IMPORTANT:
When the safety test function is activated, the NC contacts:
- If unused – are to be excluded on their relative DIP switches.
Advertenties
Inhoudsopgave
