Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
2. Designated use
2.1 Intended purpose
The clipper is exclusively intended for clipping cattle, horses or large dogs. Any other use, in particular on
humans, is explicitly prohibited.
2.2 Technical data
Type designation:
Supply voltage:
Motor rating:
Frequency: 50 Hz
Dimensions (W/H/L):
Weight without cable:
Sound pressure level:
Strokes:
Protection class:
Safety:
CE:
Operating conditions
Max. ambient temperature:
Max. air humidity:
2.3 Equipment
1 clipper with clipper head, 1 set of shear blades (mounted), (100 ml), 1 screwdriver, 1 operating manual
and 1 storage case
3. Initial commissioning
3.1 Inspection and operating instructions
The inappropriate use of electrical devices, in particular animal breeding devices, is dangerous! Therefore,
observe the following, accident prevention measures before starting the machine:
• Never switch the machine on without properly mounted clipping plates • The volt specification on the
rating plate must correspond to the mains voltage. The machine may only
be operated with AC • Avoid any contact with the moving blades • Always pull the power
supply plug out prior to maintenance work! Do not touch the blade area, even if the machine is switched
off, as long as the machine is connected to the current supply • Always place machine on a dry surface
and store in dry rooms • Avoid any contact with a machine, which is in contact with liquids. Never clip wet
animals. Liquids that have penetrated into the machine reduce the electrical insulation. There is the immi-
nent danger of an electric shock or short-circuit. Only clean the machine with a dry cloth and a paint-brush
or brush • A cable lying on the floor can get caught and be dangerous. Lay the cable carefully and safely
before clipping. Prevent the clipper connection cable from kinking or tangling. Ensure that animals do not
stand on the cable, walk over it or get caught. Keep the cable away from hot surfaces. Never wind the cable
18175#BA_FarmClipper2_A5.indd 18
18175#BA_FarmClipper2_A5.indd 18
18175
230 V AC
200 W
50 Hz
80 x 62 x 295 mm
1030 g
85 dB (A)
2600/ min
II
Corresponds to EN 60335-1, EN 60335-2-8, EN 62233
CE-marking in accordance with the directives
2004/108/EC, 2006/95/EC
0 – 40° C
10 – 90 % (relative)
18
30.08.2010 10:06:40 Uhr
30.08.2010 10:06:40 Uhr
Advertenties
Hoofdstukken
Inhoudsopgave
