Advertenties
Beschikbare talen
Beschikbare talen
SinePower
The device can also be configured with a PC via an RS-232 interface and using the
DIP switches on the device.
The inverter can be switched to an energy-saving mode to prevent the connected
battery from discharging too quickly.
The inverter can be easily controlled using the remote control (accessory).
The SinePower MSI1812T and SinePower MSI1824T inverters are fitted with a
230 Vw priority circuit. If an external 230 Vw voltage is available, this will have pri-
ority. If no external 230 Vw voltage is connected, then the connected battery will be
used as the power supply.
7.1
Control elements
I
NOTE
The version for continental Europe is depicted.
The inverter has the following connections, displays and control elements on the
back:
No. in
fig. 5,
Designation
page 4
1
Terminal
2
RS-232 port,
REMOTE port
3
POS+
4
NEG–
5
Earth terminal
EN
All manuals and user guides at all-guides.com
Description
Setup operation via remote control
Connection of a PC using a serial RS-232 interface or
connection of the MCR-7 or MCR-9 remote control
Positive terminal
Negative terminal
Earthing on the vehicle bodywork
Technical description
15
Advertenties
