Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Thermal safety rules
▶ Do not exceed the maximum fastener driving rate recommended in the section headed "Technical data".
▶ If the fastening tool overheats or if the cartridge strip deforms or melts, remove the cartridge strip and
allow the fastening tool to cool down.
▶ Do not dismantle the fastening tool while it is hot. Allow the fastening tool to cool down.
Risk of explosion with cartridges
▶ Use only cartridges that are suitable and approved for use with the fastening tool.
▶ Remove the cartridge strip when you are going to take a break and when you have finished the job, and
before you transport the fastening tool.
▶ Do not use force to remove fasteners and/or cartridges from the magazine strip or the fastening tool.
▶ Store unused cartridges in accordance with the storage specifications for cartridges for powder-actuated
fastening tools (e.g. dry, temperature between 5 °C and 25 °C) in a secured storage facility.
▶ Do not leave unused or partly used cartridge strips lying around. Collect the used cartridge strips and
store the cartridge strips at a suitable, secured location.
▶ Follow all instructions relating to safety, handling and storage in the safety data sheet of the cartridges.
3
Description
3.1
Overview illustration, DX 76
3.2
Intended use
The product described is a fastening tool for driving nails, studs and fasteners into steel.
Use the product only in combination with the equipment designed for use with the fastening tool. Fastener
guides, piston and fasteners must be compatible with one another.
Use the product only with spare parts and accessories from Hilti and with cartridges and fasteners from
Hilti, or other suitable cartridges and fasteners.
4
English
1
Fastener magazine MX 76
@
Contact pin
;
Mounting points for splinter guard
=
Cycling grip
%
Cartridge barrel (insertion)
&
Loading status control window
(
Adjusting knob for driving energy
)
Indicator for energy control
+
Padded end cap
§
Housing
/
Grip pad
:
Trigger
∙
Piston-guide locking lever
$
Piston guide
£
Splinter guard
|
Fastener stop piece
¡
Air vents
Q
Fastener guide X-76-F-15
W
Splinter guard for X-76-F-15
E
Piston
R
Piston stopper
T
282472
*282472*
Advertenties
Inhoudsopgave
