Download Inhoudsopgave Inhoud Print deze pagina

EIBENSTOCK EHR 23/2.4 S Oorspronkelijke Gebruiksaanwijzing pagina 12

Inhoudsopgave

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 33
Safety Instructions
Safe work with the machine is only possible if you read
this operating instruction and the safety instructions
completely and follow the instructions contained strictly.
Additionally, the general safety instructions of the leaflet
supplied with the tool must be observed. Prior to the first
use, the user should absolve a practical training.
If the connection cable gets damaged or cut during the use,
do not touch it, but instantly pull the plug out of the socket.
Never use the tool with a damaged connection cable.
The tool must neither be wet nor used in humid environment.
Do not use the tool near explosive materials (petrol, dilution).
Modifications of the tool are prohibited.
Always check the tool, cable and plug before use.
repaired by specialists. Only insert the plug into the socket when the tool
switch is off.
When the machine runs outside, always use a protection switch
(30 mA max.) against fault current.
The machine should only work under supervision of somebody. Plug and
switch the machine off if it is not under supervision, e. g. in case of putting up
and stripping down the machine, in case of setting up and striking, voltage
drop or when fixing or mounting an accessory.
Switch the machine off if it stops for whatever reason. This way, you avoid
that it starts suddenly and not under supervision.
Do not use the machine if one part of the housing is damaged or in case of
damages on the switch, cable or plug.
Electric tools have to be inspected by a specialist in regular intervals.
Do not touch rotating parts.
Persons under 16 years of age are not allowed to use the tool.
Before starting up, check that the mixing rod is securely attached and
rotates without a hitch.
Do not reach into the mixing container with your hands or insert any other
objects into it while mixing is in progress. Risk of crushing!
Wait until the machine or tool comes to a complete standstill. Rotating tools
can snag and cause injuries or damage.
When working with this machine wear ear protectors, goggles, dust
mask and protective gloves.
During use, always hold the machine with both hands and maintain a
safe standing position. Start up and run down the machine in the mixing
container only. Pay attention to the reaction moment of the machine.
11
Have damages only

Advertenties

Inhoudsopgave
loading

Inhoudsopgave