Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Malfunction
Motor does not work
Motor runs very
slowly
Running time of a
fully charged battery
is too short and / or
blades are getting
hot
The control light of
the charging station
in not on
When battery is un-
loaded the light does
not change from
green to red
LED flashes alter-
nately red / green
18
Cause
Faulty motor and / or elec-
tronics
Clipperhead blocked
Clipper blades were not
oiled sufficiently
Clipper blades were not
oiled sufficiently
Dead, not fully charged or
defective battery has been
used
Charging station is not con-
nected to the power supply
Charging station is faulty
Contacts of battery and/or
charging station are dirty
Faulty battery
Contacts of the charging
station are deformed
Faulty battery
Translation of the original instructions / Small animal clipper
Rectification
Have motor and / or electronics
replaced (S)
Clean and oil clipperhead
Oil clipper blades
Oil clipper blades
Only use intact and completely
charged original battery
Connect the charging station to the
power supply
Have charging station inspected (S)
Clean contacts
Replace battery
Have the charging station repaired (S)
Replace battery. Individually test bat-
teries if two batteries are inserted into
the charging station at the same time.
Advertenties
Hoofdstukken
Inhoudsopgave
