Download Inhoudsopgave Inhoud Print deze pagina

Steba SV 120 Professional Gebruiksaanwijzing pagina 16

Inhoudsopgave

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 23
∙ If a bag has burst and there is food on the radiator or propeller:
o Pull out the power plug.
o Remove the back plate by carefully loosening the 4
screws. Then loosen the screws on the radiator cover. Re-
move the residue on the propeller and radiator.
o Then reassemble all parts properly.
∙ Descaling:
o Due to minerals in our tap water, some scale may occur
on the heating elements and the housing of the device
after heating the water. This scale negatively influences
the heating efficiency and appearance of the device.
o Thus, the device needs to be cleaned 100 hours in ope-
ration.
o Insert the device into the pot. Fill with water up to the
"Min" marking. Add the vinegar (attention: rinse quickly
and thoroughly with water when chemical burn is caused
by vinegar. If the eye is still red, painful, tears and is sen-
sitive to light, medical advice is required.)
o Turn on the device and set the temperature at 50°C and
the timer to 1 hour.
o If all scale is removed, let the device run with clear water.
Unplug it and leave the device to dry before storing.
Workplace
Important:
Never place this device on or next to hot surfaces (e.g. hot sto-
ves). Only use it on an even, stable and a heat resisting surface.
It is important that no inflammable items are near to the device.
Do not place the device on the edge of the table so that it cannot
be touched by children or fall down when touched.
Vacuum packing
Only use bags that are suitable for vacuum packing. There is no guarantee of proper
closure if normal bags are used. Ensure that there are no spices in the vicinity of the
weld seam, otherwise hermetic sealing will not be possible.
16

Advertenties

Inhoudsopgave
loading

Inhoudsopgave