Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
6 C O M M I S S I O N I N G A N D O P E R AT I O N
6.5.2 Basic Temperature
X Press the orange ON/OFF switch
for at least half a second.
A vibration acknowledges activa-
i
tion and the red continuous light of
the LED display indicates heating.
When the battery is fully charged,
it takes approx. 60-80 seconds to
heat up. A double vibration and
green continuous light indicate
that the basic temperature has
been reached.
6.5.3 Booster Temperature
X Activate the booster temperature
by double-clicking the orange ON/
OFF switch.
When the LED display flashes red,
i
it indicates that the unit is heating
up. A double vibration and green
flashing signal that the booster
temperature has been reached.
Booster mode ends automatically
i
90 seconds after the booster tem-
perature has been reached; the set
temperature is then the basic tem-
perature again.
6.5.4 Superbooster Temperature
X Activate the super booster tem-
perature by clicking three times on
the orange ON/OFF switch.
The LED display indicates heating
i
by flashing rapidly red. A double
vibration and rapidly flashing green
light signal that the super-booster
temperature has been reached.
Superbooster mode ends automat-
i
ically 90 seconds after the booster
temperature has been reached; the
set temperature is then the basic
temperature again.
6.6 Application
Start the vaporization after heating
i
has finished.
X Unfold the Mouthpiece of the Cool-
ing Unit.
X Place the Mouthpiece between
your lips.
X Breathe in evenly for a few sec-
onds, but only half as much as you
actually can.
X Hold your breath for a few seconds
and then exhale slowly.
X Focus consciously on the breath-
ing process.
The more intense the vapors, the
i
greater the impairment of the flavor.
52
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
