Safety instructions
2.2
Safety when installing the device
WARNING!
!
Take the precautions necessary to ensure that children cannot
interfere with operation.
Dangerous situations may occur which cannot be recognised by
children!
CAUTION!
!
Ensure the device is standing firmly.
The device must be set up and fastened in such a way that it
cannot tip over or fall down.
NOTICE!
A
Do not expose the device to a heat source (such as direct sun-
light or heating). Avoid additional heating of the device in this
way.
Electrical cables
CAUTION!
!
Lay the cables so that they cannot be tripped over or damaged.
NOTICE!
A
If cables have to be fed through metal walls or other walls with
sharp edges, use ducts or wire bushings to prevent damage.
Do not lay cables which are loose or bent next to electrically
conductive material (metal).
Do not pull on the cables.
Do not lay the 230 V mains cable and the 12/24 V DC cable in
the same duct.
Fasten the cables securely.
2.3
Operating the appliance safely
WARNING!
!
Operate the device only if you are certain that the housing and
the cables are undamaged.
Even after the fuse triggers, parts of the inverter remain live.
20
SinePower
EN