Download Print deze pagina

camry CR 5040 Gebruikershandleiding pagina 5

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 59
E. Folding handle
F. Power cord
G. Transparent water tank
H. Thermostat indicator light
I. Thermostat knob - temperature adjustment
J. Button for folding the handle
K. Voltage switch 220-240V / 110V-120V
NOTE!!!
After unpacking the device, check the supply voltage of the power grid and set the voltage switch (K) to the correct position.
It is forbidden, to change the position of the voltage switch (K), during operation of the device
For the safety of users, each iron is filled with water and tested in the quality control process. Therefore, it may happen that a few
drops of water flow out of the device before the first use, which is a normal phenomenon.
PRESSING
First use
When using the iron for the first time, you may smell a faint odor of smoke and hear sounds coming from the plastic parts
expanding under increasing temperature. This is normal and will subside after a short time of use. It is also recommended to
perform the first ironing on ordinary everyday clothes.
Table:
MARKINGS ON LABELS TYPE OF MATERIAL THERMOSTAT CONTROL
Preparation
Sort the laundry to be ironed according to, found on the labels of international markings regarding ironing, or if they are missing by
fabric type.
Start ironing with fabrics that should be ironed at low temperature. This order of ironing significantly reduces waiting time (the iron
heats up faster than it cools down) and eliminates the risk of burning.
Ironing with steam
1. Check that the plug is unplugged from the outlet.
2. Slide the steam function switch (C) to the right to turn off steam generation.
3. Open the water filler hole cover (B). Lift the front of the iron to pour water into the tank more easily and avoid spills.
4. Slowly, using a special container, pour water into the tank, all the time being careful not to pour over the level marked on the
scale as "MAX" (about 80 ml). Close the lid of the water filler opening (B).
5. Place the iron in an upright position. Insert the plug into the socket.
6. Adjust the thermostat knob according to the international symbol on the label of the garment being ironed.
7. The thermostat indicator light indicates that the iron is heating up. Wait until the thermostat indicator light goes out. You can then
start ironing.
Silk - wool
Low temperature -
Synthetic fiber
Medium temperature - -
Cotton
High temperature - - - -
DO NOT PRAISE
5

Advertenties

loading