Warning: during ironing, the thermostat indicator light turns on from time to time, this means that the selected temperature is kept
constant. If you have lowered the temperature, do not start ironing until the thermostat light comes on again.
8. Slide the steam function switch (C) to the left to turn on steam generation.
Warning: Continuous steam generation occurs only when you hold the iron in a horizontal position. You can stop the steam
generation by placing the iron in a vertical position or by sliding the steam function switch (C) to the right.
The steam ironing function can only be used at the highest temperatures. Water may drip from the iron if the selected temperature
is too low.
9. Steam impact button
Press the Steam Stroke button (D) to cause a quick burst of powerful steam, which easily penetrates fabrics and can smooth out
the biggest creases. Wait a few seconds before using this button again. When using the steam impact button, maintain proper
intervals between its use.
Dry ironing
To iron without steam, slide the steam function switch (C) to the right
PROCEEDING AFTER IRONING
Unplug the iron from the outlet. After the iron has cooled down, empty the reservoir by turning the iron upside down and shaking it
gently. Allow the iron to cool completely. Always place the iron in an upright position.
TIPS
1. We recommend using low temperatures when ironing fabrics that have special finishes, decorations (sequins, embroidery,
etc.....).
2. If the fabric is made of different materials (for example, 40% cotton 60% synthetic fibers), set the thermostat to the temperature
of the material with a lower ironing temperature (in this case, it will be the ironing temperature of synthetic fibers - that is, the low
temperature).
3. If you do not know the composition of the fabric, determine the appropriate temperature by performing an ironing test, on a part
of the garment that is invisible under normal wear. Start with a low temperature and gradually increase until you reach the right
temperature, safe for the fabric.
4. Any dirt, stains are fixed after ironing, so before ironing, check whether the clothes are clean. If not, wash them first.
5. The best results are achieved, when ironing dry, at medium temperature: too high a temperature or holding the iron in one place
for too long can cause yellow stains (burning).
6. To avoid the "shiny" effect of materials made of silk, wool or synthetic fibers, iron them turned inside out.
7. To prevent ironing marks on velvet, iron the material in one direction (along the fiber) and do not press the iron against the
material.
8. Many fabrics are easier to iron when they are not yet completely dry.
TECHNICAL SPECIFICATIONS:
Voltage: 110V-120V ~ / 220-240V ~ 50/60Hz
Nom . power: 1000W
Power Max .: 1600W
Caution hot surface:
The temperature of the accessible surfaces of the operating device may be high. Do not touch the hot surfaces
of the unit
For the sake of the environment. Dispose of cardboard packaging and polyethylene (PE) bags in the appropriate containers for separate collection of
municipal waste according to their description. If there are batteries in the device, remove them and separately return them to the collection and storage
facility. Return the used device to a suitable collection and storage facility, as the hazardous substances in it may pose a threat to health and the
environment. The marking on the product indicates that the device should not be disposed of in the container with municipal waste. Waste electrical
equipment, is waste that contains substances harmful to humans, animals and the environment. These substances can lead to contamination of the soil,
water or air, and through this they can enter the human body and lead to numerous health ailments, such as vision, hearing, speech disorders, they can also
damage the kidneys, liver and heart, and cause skin diseases. Harmful substances can also have adverse effects on the respiratory and reproductive
systems and lead to cancerous changes. Consumption of plants growing on the complained of soils, and products made from them may risk the above-
mentioned health effects. Do not dispose of the device in the municipal waste container!!!
Service If you wish to purchase spare parts or report any complaints, please contact directly with the seller who issued the receipt.
6