Advertenties
Beschikbare talen
Beschikbare talen
inspection or repair. Any repairs may be made only by authorized service centers.
Improper repair may cause serious danger to the user.
10. Place the appliance on a cool stable, level surface, away from hot kitchen
appliances such as an electric stove, gas burner, etc.
11. Do not use the device near flammable materials.
12. The power cord must not hang over the edge of the table or touch hot surfaces.
13. Do not leave the device plugged into an outlet unattended.
14. To provide additional protection, it is advisable to install in the electrical circuit, a
residual current device (RCD) with a rated residual current of not more than 30 mA. In
this regard, consult a specialist electrician.
15. If it is necessary to use an extension cord, use only one with a grounding pin and
suitable for the loaded power, not less than the iron connected to it. Other ("weaker")
extension cords may overheat. Arrange the cable so as to avoid accidental pulls or
tripping over it.
16. Always, before filling the iron with water or when the iron is not in use, disconnect it
from the power supply.
17. Touching the hot foot, contact with hot steam or water risks burns. Be careful when
you turn the iron upside down with the foot, as there may still be hot water in the
reservoir, even when the iron is unplugged.
18. DO NOT allow the hot iron to come into contact with fabrics or flammable materials
for too long.
19. Be careful that the power cord does not come into contact with the hot iron foot.
Allow the iron to cool completely before putting it away.
20. If you do not use the iron even for a short time, turn off the steam options.
21. Do not, under any circumstances, iron clothes or materials on people or animals.
22. Never direct the steam onto people or animals.
23. Use the iron on a stable level surface and only put it down on such a surface.
24. Do not pour water with chemical additives, fragrances or descaling preparations
into the tank.
25. Do not fill the water tank above the MAX level.
26. The power plug must be unplugged from the plug socket before filling the tank with
water (for irons with steam humidification and irons with a washer.
27. The opening for filling the water tank must not be opened during ironing.
28. The iron is not designed for regular use
PRODUCT DESCRIPTION (fig. 1)
A. Iron foot
B. Water filler hole
C. Steam function switch
D. Steam shock button
4
Advertenties
