Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Minimum flow adjustment (4-burner version)
The minimum flow is correctly adjusted when the flame remains lit without a pot on the pan sup-
port in position 1 of the burner control.
To adjust the minimum flow of each burner, proceed as follows:
Press the "+" and "-" buttons simultaneously for approx. 3 seconds as shown in the figure above.
"MIN" will appear on the display indicating the activation of the adjustment procedure.
At this stage, select the burner to be adjusted using the "+" and "-" buttons. By pressing these
buttons repeatedly, a LED will light up showing the selected burner.
To confirm the selected burner, press the timer button.
The selected burner will light on the maximum setting. It will automatically start a test and it is
not possible to tack action now. The test ends at postion 1. Now it will be possible to increase
or decrease the minimum flow, use the "+" and "-" buttons of the specific burner. The setting is
between 1 and 9.
After adjusting the burner, press the timer button again to exit the procedure. The minimum
flow settings are saved and will be used each time you use the appliance.
78
All manuals and user guides at all-guides.com
Advertenties
Hoofdstukken
Inhoudsopgave
