Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Drying timer mode (optional)
fig 1-4
Hold the "
" button for at least 1.5 seconds to switch to the drying timer mode, the
2nd
starts flashing "- -", short press "˄" to adjust the time and "v" to adjust the
line
decrease time. After setting, wait 8 seconds and the towel holder will automatically
save the time if no other buttons are pressed. (see fig 1-5)
Tips:
1. When you switch to drying countdown mode, drying is usually enabled by default
and "- -" will be displayed by default for the set time, the remaining time will not be
displayed. (see fig 1-4)
2. When adjustment ends or the "
the "
" button again to turn the heater on again. When the countdown time is
set, the timer will be reset; if the countdown time is not set, the drying mode will
turn on normally.
3. During the countdown, reset the setting time to "- -" to resume normal drying.
5+2 Programming mode
You can program the towel warmer to
suit your lifestyle – week and weekend,
with 4 time slots per day.
Step 1: Hold the "
least 1.5 seconds to enter the 5+2
programming mode. The 5 in the
middle of the first row starts flashing,
briefly press the "v" or the "˄" to adjust
this to 2.
Step 2: Hold "˄" for at least 1.5 seconds until the number 1 starts flashing on the
right side of the top row, this is the program. Short press "˄" to adjust the 1 up or
short press "v" to adjust the number back down. (see fig 1-7)
Note: Once you select program 4, programs 1-3 will be disabled.
fig 1-5
" button is pressed the heater will turn off, press
" button for at
20
Droogtimermodus
weergave
Ingestelde tijd
Resterende tijd
5+2
programmeermodus
weergave
Begintijd
Eindtijd
fig 1-6
Advertenties
Hoofdstukken
Inhoudsopgave
