Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Usage
Description
LCD Scherm
Omhoog
AAN/UIT
Omlaag
temperature, the heating will turn on. When the room temperature is 1˚C than the
set temperature, the heating is switched off.
Get started
1. Check that the power cord is intact.
2. Check that the supply voltage is consistent. (The socket is required to have a
grounding terminal and good grounding performance.)
3. Check whether the plug of the power cord and the socket are matched, the socket
can withstand minimum circuit requirement. If this is not the case, the towel
warmer cannot be used.
Instructions for use of heating function
Manually switch the panel On/Off
1. When power is applied to the towel warmer, a small
square will appear on the LCD screen ( fig 1-1)
2. In standby mode, short press the "
the towel warmer and enter heating mode. Briefly press
"
" again to turn off the towel warmer.
1.
The screen shows the room temperature and
target temperature, date and time and adjustment
and working mode.
2.
Touchscreen display with mode selection,
flexible programming, temperature adjustment and
time setting.
3.
The device has 4 working modes: Normal
heating via temperature, dryer timer mode ( optional
), 5+2 weeks timer mode, 1-7 timer mode.
4.
The temperature sensor on the bottom of the
towel warmer reads the room temperature and
indicates when the towel warmer should be turned
on/off if the ambient temperature changes. When
the room temperature is 1˚C lower than the set
" button to turn on
18
fig 1-1
Advertenties
Hoofdstukken
Inhoudsopgave
