Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Set the time and day
It is essential that the time and day are set accurately
before you can set time slots .
1. Press and hold the "v" button for more than 1.5
seconds until the hour starts flashing. Use the "v"
or "˄" button to adjust the hour. Press and hold "v"
again for more than 1.5 seconds to cycle through
the minutes and day.
2. After installing, wait 8 seconds, the towel warmer
will automatically exit the program and exit the
settings.
Note: In any operating mode, the display will change to the current time every 3
seconds. ( fig 1-2)
How can I switch working modes?
Press and hold the "
mode.
˚C/˚F display
Press and hold "v" and "˄" at the same time for more than 1.5 seconds to switch
between Celsius and Fahrenheit.
Normal heating open mode
Ingestelde
Tempratuur
fig 1-3
1. The standard display for the set temperature shows "T 20C", "C" that the heater is
set to Celsius
2. When the set temperature is higher than the room temperature, "
displayed on the screen
3. If you press the "
turned off, press the "
" button for more than 1.5 seconds to change the working
Modus
weergave
Kamer-
temperatuur
Verwarmings-
symbool
" button again during the heating process, the heating will be
" button again to turn the heater on again.
19
fig 1-2
Press the "
" button to turn
on the towel warmer and enter
normal heating mode. Use the
"v" and "˄" to adjust the
Temprature setting. After 8
seconds the towel warmer will
save the set temperature.
When no other buttons are
pressed.
Tips:
" will be
Advertenties
Hoofdstukken
Inhoudsopgave
