Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
in 30 minutes). The window open icon will start to blink
and continue to blink as long as the function is active.
To return to the previous or automatic mode push the
"OK" key twice. If no manual intervention is detected, the
controls will check after 30 minutes whether a positive
temperature change has occurred (window closed) and
if so, return automatically to the previous or automatic
operating mode.
4. PARAMETER MENU
Your thermostat has a parameter menu. In order to enter
this menu, press and hold the "OK" key for 5 seconds.
Then the parameter menu will appear and the first menu
screen will displayed.
Parameters can be selected using the left "" and right
"" navigation keys. Once the parameter is chosen, toggle
the value with the "OK" key, modify it with the "+" or "-"
keys and confirm your adjustment with the "OK" key.
To exit the parameter menu, choose the parameter
"END" and press "OK".
DEFAULT VALUE & OTHER POSSIBILITIES
00
rF i: WIRELESS RADIO INITIALIzATION (PAIRING)
Press "OK" to enter this initialization sequence.
Select with "+" or "-" the radio communication type
and validate by pressing "OK":
•
rF.un: unidirectional communication, the digital
thermostat only receives orders from 4 zone programmer.
•
rF.bi: bidirectional communication with the touch screen
programmer. The digital thermostat returns state and
power consumptions to the programmer.
Then the backlight is stopped and the digits --- are
cycling showing that the digital thermostat is waiting
for a radio link signal from the Clock to be send (press
"" to cancel this radio initialization).
LVI0014_Manual Ramo_Parada_ZW_v5.indd 25
All manuals and user guides at all-guides.com
When the radio link signal is received, pairing is saved,
backlight lights up it will return to menu selection (rFi).
01
dEG: TyPE OF DEGREES DISPLAyED
Press "OK" to enter this parameter. Select with "+" or "-"
and validate by pressing "OK" :
°C = Celsius
°F = Fahrenheit
04
__._ : CALIBRATION OF THE INTERNAL PROBE
The calibration must be done after 1 day working with
the same setting temperature in accordance with the
following description:
Put a thermometer in the room at 1.5m distance
from the floor (like the thermostat) and check the real
temperature in the room after 1 hour.
When you enter on the calibration parameter the actual
value is displayed.
To enter the value shown on the thermometer, use the
"-" or "+" keys to enter the real value. Then, press "OK" to
confirm. The hand icon should be displayed, to inform
that a calibration is now made and saved in the memory.
If you need to erase a calibration already made, press
the left navigation key "". Then the hand icon must
disappear.
PLEASE NOTE:
Only the heating element managed by the thermostat
must be used during the complete step of the calibration.
Do not have a secondary heat source in the same room
for a period of 24 hours before.
05
AF: FROST PROTECTION TEMPERATURE:
This frost protection temperature used in holiday mode.
Adjustable from 0.5 to 10.0°C. Default value 7.0°C.
08
SRC : SEQUENTIAL CONTROL OF FRONT AND
BACK PANEL
Press "OK" to enter this parameter.
Select with "+" or "-" and validate by pressing "OK" :
GB
GENERAL
INFORMATION
25 |
24-10-13 15:58
Advertenties
Inhoudsopgave
