FROST PROTECTION MODE
This mode is to be used when the house is un-occupied
for extended periods of time.
OFF MODE
In this mode the radiator is switched off.
•
The radiator will no longer receive signals from a
wired or wireless (RF) programmer.
•
At any time you can check the measured room
temperature by pressing the "OK" key twice.
•
ATTENTION: In this mode, your radiators may freeze
in very cold weather. Please be aware, if there is no
heating in your property then your pipes could freeze.
For the protection of product and property in very low
temperatures we recommend the "frost protection"
mode is used.
ATTENTION: In this mode the radiators are still
•
connected to the electrical supply.
RADIATOR CONNECTED TO A CENTRAL
WIRED (PILOTE WIRE) OR WIRELESS (RF)
CENTRAL PROGRAMMER
•
When connected to a central programmer, select the
automatic operation mode.
•
WIRED 2 ORDER PROGRAMMER (Picture 4a)
LVI0014_Manual Ramo_Parada_ZW_v5.indd 23
All manuals and user guides at all-guides.com
AUTOMATIC MODE
•
Default value:
15,5°C
•
Comfort mode is active. At set comfort temperature.
•
Reduced mode is active. At set comfort temperature
-3,5°C. The
WIRED 6 ORDER PROGRAMMER (Picture 4b)
•
•
Default value:
7,0°C.
AUTOMATIC MODE
•
•
•
•
•
-1
•
-2
•
WIRELESS (RF) 4 ORDER PROGRAMMER (Picture 4c)
, in section 8 of the LCD display, blinks.
Comfort mode active. At set comfort temperature.
Reduced mode active. At set reduced temperature.
The
, in section 8 of the LCD display, blinks.
Frost protection mode is active.
The
, in section 8 of the LCD display, blinks.
The radiator is switched off. The set frost protection
temperature is displayed. The
LCD display, blinks.
Comfort mode active. At set comfort temperature
-1°C. The
-1
, in section 8 of the LCD display, blinks.
Comfort mode active. At set comfort temperature
-2°C. The
-2
, in section 8 of the LCD display, blinks.
GB
GENERAL
INFORMATION
, in section 8 of the
23 |
24-10-13 15:58