Connecting The Refrigerator To The Power Supply; Mounting And Removing The Door Handle; Operation - Dometic SILENCIOHC HC302 Montagehandleiding
Verberg thumbnails
Zie ook voor SILENCIOHC HC302:
- Montagehandleiding en gebruiksaanwijzing (76 pagina's)
Advertenties
Beschikbare talen
Beschikbare talen
All manuals and user guides at all-guides.com
Operation
6.4
Connecting the refrigerator to the power supply
A
NOTICE!
• Connect the refrigerator to a separate circuit to prevent
malfunctioning due to problems with other electrical equipment.
Never connect the refrigerator to a single socket with other electrical
equipment by means of a multi-socket.
• UK only: The refrigerator is supplied with a plug fitted with 3 A fuse.
In case this fuse has to be to changed, a 3 A ASTA approved
(BS 1362) fuse must be used.
1. Connect the plug of the connection cable into the AC mains.
2. Insert the battery into the thermometer (see chapter "Replacing the battery of
the thermometer" on page 18).
✔ The display turns on.
For the first two seconds the display will not show temperature values; it shows
"--.-". Then the temperature read from the sensor is shown.
6.5
Mounting and removing the door handle
1. Mount the handle as shown (fig. 7, page 6).
2. Remove the handle as shown (fig. 8, page 6).
7
Operation
7.1
Before first use
Before first use, clean the refrigerator inside and outside with a damp cloth for
hygienic reasons (see also chapter "Cleaning and maintenance" on page 19).
7.2
Saving energy
• Only open the medication refrigerator as often and for as long as necessary.
• For optimal energy consumption, position the shelves and drawers according to
their position on delivery.
• On a regularly basis, make sure the door seal still fits properly.
• Clean dust and dirt from the condenser at regular intervals.
16
HC302, HC502
EN
Advertenties
Hoofdstukken
