Advertenties
• Do not add another mattress on the top of the mattress provided or recommended by the manufacturer.
• Do not leave anything in the carry cot that could present a danger of suffocation e.g. non-rigid toys, pillows etc.
• Do not place the carry cot close to another product, which could present a danger of strangulation, e.g. strings, blind/curtain cords etc.
• Overheating can endanger the life of your child! Take into account the ambient temperature and the child's clothing and ensure that the child is not too
cold or too warm.
• It's recommended to ask a health professional for advice on safe sleeping.
The following applies to the pushchair:
WARNING!
• Always use the restraint system.
• The product is intended for children from 0 months old to 22 kg or 4 years whichever come first.
• We recommend using lowest reclined position for newborn babies.
Applies to the car seat:
The Kinderkraft NEA 2 buggy can be offered in a set with a compatible car seat. If the car seat is used together with the buggy, it does not replace a cradle
or crib. For sleep, place the child in the pram body, cradle or crib. Use only parts and accessories supplied or recommended by the manufacturer.
I STROLLER PARTS
1.
Frame with basket (2)
4.
Pram body
6.
Leg cover
10.
Additional panel for canopy (pram body)
12.
Armbar
14.
Front wheel x2
16.
Transparent rain cover
18.
Cup holder
II UNFOLDING THE FRAME
Stand the frame (1) with basket (2) on a flat surface, handle up. Press the lock button on the frame to unlock it (Fig.A.I) and pull up both levers
simultaneously (Fig.A.II). Lift the handle and unfold the frame until it locks into position (Fig.B). Push the rear axle onto the frame until it clicks (Fig.C).
III ASSEMBLING/DETACHING THE WHEELS
Click the front wheels (14) into the holes in the front part of the frame (Fig.D.I). Press the release button to remove the front wheels. The stroller is equipped
with swivel front wheels which can be locked to move forward only. Pull the blocking lever up/down to unlock the swivel wheels (Fig.D.III). Insert the rear
wheels (13) into the holes on the rear axle of the frame until they are locked completely. Make sure the flat surfaces of the axle and the hole are set
properly (Fig.E.IV). Push the release button and pull the rear wheel to remove it (Fig.E.V).
NOTE! Before using the buggy make sure that all the wheels are properly installed.
IV. USING THE BRAKE
The stroller is equipped with a foot parking brake. Step on the brake. When the locking sound is heard, the brake is activated (Fig. F). You can release the
brake by lifting the lock.
V. ASSEMBLY/DISASSEMBLY
V.I PRAM BODY
Stand the pram body (4) on a flat surface. To unfold the pram body, remove the leg cover and the mattress inside it and then pull the tape to fit the front
bar until it is locked. Repeat these steps in order to fit the rear bar (Fig.G). Attach the additional panel (10) to the canopy with the zip (Fig.H). Place the
mattress (5) inside the pram body.
Place the so prepared pram body on the frame (Fig.I). Make sure the fasteners on both sides are locked. In order to remove the pram body, press the
release buttons on both sides simultaneously (Fig.J).
Repeat these actions in reverse to fold the pram body. Handle use position when carrying or lifting (FIG.OO).
NOTE! THE PRAM BODY CAN ONLY BE MOUNTED FACING BACKWARDS (the child
faces the person pushing the buggy).
NOTE! Do not fold the buggy frame when the Pram body is installed on it.
Set the canopy in a desired position with the use of folding and unfolding buttons on both sides of the pram body (Fig.K). You can use the zip on the canopy
in order to extend it. The pram body has an additional ventilated panel at the front. To open the panel unzip the zip and pull down the cloth (Fig.L). The
second ventilation panel is placed on the canopy. To open the second panel, unzip the zip and roll up the cloth (Fig.M). Fit the leg cover by using the zips.
Both zip fasteners have to be on the right hand side. Move the lower fastener along the body to close the cover (Fig.N). The leg cover is equipped with an
additional windproof panel which can be fitted with the use of snaps inside the pram body. Place the transparent rain cover over the body and secure it on
both sides with the button and eye under the frame (Fig.O). The mosquito net should be placed over the pram body (Fig.P).
V.II SEAT
Place the seat (7) onto the frame until it clicks (Fig.Q). The seat can be attached in the forward facing position or in the rearward facing position (Fig.R). To
remove the seat, press the buttons on both sides and pull up (Fig.S). To fit the cover, just remove the armbar (12) following the instructions in V.IV and
then insert it through the holes in the cover (Fig.T). Next, locate the armbar in the right position into the seat frame (Fig.U). Use the button to fit the cover
to the sides of the frame with the eye.
V.III CANOPY
NOTE! Install the canopy before using the buggy.
The canopy (8) is attached to the seat frame. You can zip the additional panel onto the canopy (11). To remove the canopy, undo the zip (Fig.V) and the
snaps on the sides of the seat. Now pull the canopy on both sides of the frame, as shown in Fig.W. To refit the canopy, repeat the actions in reverse order.
The canopy can be adjusted in several positions (Fig.X).
V.IV ARMBAR
Push the armbar onto each side of the frame until it locks into position (Fig.Y). In order to detach the armbar, push the buttons on both sides of the frame
and remove it (Fig.I).
V.V SAFETY BELTS
Safety belts (9) need to be adjusted each time to ensure proper protection of the baby.
3.
Rear axle
5.
Pram body mattress
7.
Seat with canopy (8) and safety belts (9)
11.
Additional panel for canopy (stroller)
13.
Rear wheel x2
15.
Leg cover for stroller
17.
Mosquito net
19.
Adapters
20.
Mommy bag & changing mat(21.)
24
Advertenties
