Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
GB
Never hold the spray gun rear part under water or immerse it into liquids.
Clean the housing only with a moistened cloth.
12)
Clean the outside of the spray gun and container with a cloth soaked in solvent or
water.
13)
Remove the adjustment ring (fig. 11, 1) carefully from the union nut (2).
14)
Unscrew the union nut (fig. 11, 2) and remove the air cap (3) and nozzle (4). Clean the
air cap and nozzle with a brush and solvent or water.
Assembly
The unit may only be operated with an integer diaphragm (Fig. 10, 3).
•
Place the diaphragm
the valve. Also see the marking on the gun body.
•
Place on the valve cover
•
Place the ventilating hose
body.
•
Slide the nozzle seal (Fig. 12, 5) with the groove (slot) facing forwards into the nozzle.
•
Place the nozzle (fig. 12, 4) on to the gun body with the recess facing downwards.
Position of needle must be congruent with the nozzle aperture. (Fig.13)
•
Put the air cap (Fig. 14, 3) onto the nozzle (4) and tighten it using the union nut (2).
•
Position the adjustment ring (fig. 15, 1) on the union nut so that the recesses on the
adjustment ring can snap into both horns on the air cap.
•
Place the container seal from below on the suction tube and slide it over the collar, while
turning the container seal slightly.
•
Insert the suction tube with container seal in the gun body.
Maintenance
WARNING! Never operate the machine without the air filter; dirt could
•
Change the air filter if it is soiled (Fig. 16).
•
In order to mount the gun more easily apply lubricating grease (enclosed) liberally
to the O-ring at the gun front part. (Fig. 17, 6)
Pos. Designation
1
Spray jet adjustment ring
2
Union nut
3
Air cap
4
Nozzle
5
Nozzle seal (2 pcs.)
22
All manuals and user guides at all-guides.com
(Fig. 10, 3) with the pin facing upwards on the bottom section of
(Fig. 10, 2) and screw it closed.
(Fig. 10, 1) on the valve cover and on the nipple at the gun
be sucked in and interfere with the function of the machine.
Disconnect plug before changing parts.
Spare Parts List (Fig. 17)
W 565
Attention:
Order No.
2328 900
2328 903
2328 905
2328 908
2304 433
Advertenties
Inhoudsopgave
