Advertenties
Beschikbare talen
Beschikbare talen
WARNING
Electric shock due to permissible electric potential difference
Due to the permissible electric potential difference, a dangerous voltage may be present at the inputs of modules. An electric
shock on contact with live parts can lead to death or serious injury.
Therefore, ensure that the plant is completely disconnected from the power supply before starting work. This means that all
externally supplied plant units must also be disconnected from the power supply.
Electromagnetic Compatibility
The product is intended for operation in the Industrial EMC environment class and residential environments.
Ensure that your automation system is installed in compliance with EMC requirements, as described in the
(
https://support.industry.siemens.com/cs/ww/en/view/109744222
NOTICE
Interference emission / Interference immunity
LOGO! is intended for use in the industrial field as well as in residential environments.
If higher EMI is expected at the place of use than is intended for the industrial area according to EN61000-6-2, additional
measures are required (e.g. ESD, overvoltage protection).
Cleaning
If you need to clean the product, use dry ESD cleaning cloths (observing the protective measures for ESD).
Requirement: All supply voltages present on the device are switched off. Observe the five safety rules for working in and on
electrical installations.
Maintenance and repair
The product is maintenance-free. Repairs to the product may only be carried out by the manufacturer.
Recycling and disposal
For environmentally sustainable recycling and disposal of your electronic waste, contact a company certified for the disposal
of electronic waste. Dispose of the product in accordance with the applicable regulations in your country.
Accessories
You can find information on the approved accessories in the
(
https://support.industry.siemens.com/cs/ww/en/view/109744222
Accessories for LOGO! CIM
Information on the radio modules, antennas and cables that can be used with LOGO! CIM can be found in the operating
Logo! CIM (
manual
https://support.industry.siemens.com/cs/ww/en/view/109813749
Compact Operating Instructions
A5E52459864-AD, 03/2024
)
for the product.
documentation
)
.
)
documentation
in the Accessories section.
9
Advertenties
