Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Safety Notes
Gloves should be worn during installation to prevent
crushing and cutting injuries.
The shower system may only be used for bathing,
hygienic and body cleaning purposes.
Do not allow the streams of the shower touch sensi-
tive body parts (such as your eyes). An adequate
distance must be kept between the shower and you.
Shower hoses are only suitable for a connection
from the shower to the fitting. Never fit a shut-off
device between the fitting and the hose.
Intended use of the handle: The handle is not a medi-
cal product, it is not intended for physically impaired
persons, but only for general private use.
Check the proper attachment and tight seating of the
installed products periodically (annually).
Installation Instructions
• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
• The plumbing codes applicable in the respective
countries must be oberserved.
• Where the contractor mounts the product, he should
ensure that the entire area of the wall to which the
mounting plate is to be fitted, is flat (no projecting
joints or tiles sticking out), that the structure of the wall
is suitable for the installation of the product and has
no weak points. The enclosed screws and dowels are
only suitable for concrete. For another wall construc-
tions the manufacturer's indications of the dowel
manufacturer have to be taken into account.
• The mesh washer must be insert to protect the over-
head shower against incoming dirt by pipework. In-
coming dirt leads to defects or/and can damage parts
of the shower; such caused faults voids all liability and
guarantee claims.
• For removal of the installed EcoSmart (flow limiter)
from the shower, the pressure must be lower than
0.2 MPa. With a pressure of more than 0.2 MPa, the
EcoSmart must not be removed.
4
English
• Optimal functioning is only guaranteed with the com-
bination of Hansgrohe hand showers and Hansgrohe
shower hoses.
Technical Data
Operating pressure:
Recommended operating pressure:
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
Thermal disinfection:
The product is exclusively designed for drinking water!
Symbol description
Assembly see page 31
Do not use silicone containing acetic acid!
Dimensions (see page 32)
Flow diagram
(see page 33)
Operation (see page 34)
Cleaning (see page 35) and en-
closed brochure
Spare parts (see page 36)
Special accessories (order as an
extra)
tile-matching-disk chrome plated
#96380000
Test certificate (see page 36)
max. 0,6 MPa
0,15 - 0,4 MPa
max. 60°C
max. 70°C / 4 min
Advertenties
Inhoudsopgave
Gerelateerde Handleidingen voor Hansgrohe Unica Comfort 26321000
Gerelateerde Producten voor Hansgrohe Unica Comfort 26321000
- Hansgrohe Raindance Select 26466000
- Hansgrohe Raindance Select 26466400
- Hansgrohe Raindance Select 26467000
- Hansgrohe Raindance Select 26467400
- Hansgrohe Pulsify S Puro Showerpipe 260 1jet 24222 0 Series
- Hansgrohe Pulsify S Puro Showerpipe 260 1jet EcoSmart 24223 0 Series
- Hansgrohe AXOR One 260 48002 Series
- Hansgrohe Finoris 260 76070 Series
- Hansgrohe Pulsify Showerpipe 260 2jet 24240 Series
- Hansgrohe Pulsify Showerpipe 260 2jet Eco 24241 Series
- Hansgrohe Metropol 260 32512 Series
- Hansgrohe Metropol 260 74512000
- Hansgrohe Croma Select S 280 1jet Showerpipe 26792000
- Hansgrohe Croma Select S 280 1jet Showerpipe 26892000
- Hansgrohe Crometta E 240 1jet Showerpipe Reno EcoSmart 27289000
- Hansgrohe Raindance Select S 300 2jet Showerpipe 27133000