All manuals and user guides at all-guides.com
Connection and Control Elements
(12)
On / Off switch
With this switch you turn the mixing desk on or off. In position „ON" the mixing desk is on, in position „OFF",
the mixing desk is off.
(13)
Connection AC 9V
The low-voltage plug of the enclosed power pack unit is connected here for power supply.
(14)
Connections USB1/2
These sockets serve to connect the USB interface of a computer.
The USB ports are designed as inputs for playback on the computer and output for recording the master
signal from the mixing desk.
(15)
MASTER OUTPUT connection sockets
These asymmetrical stereo cinch outputs are the output sockets for the mixer's output signals. Connect the
amplifier of your system here.
The signal volume is affected by the GAIN controls (1), the channel faders (7) and the MASTER LEVEL
(11).
(16)
LINE connection sockets
You may only connect LINE devices to these sockets.
(17)
PHONO connection sockets
You may only connect record players with a magnet system to these sockets.
(18)
Ground screw GND
To prevent buzzing tones, an earth connection can be made through these screw terminals between the
mixer and the earth cables of the record player (mostly black cable with clamp-type socket).
26