Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Connection and Control Elements
(7)
Channel fader
The channel faders are for adjusting the level of each channel.
Slide control to the bottom position = minimum channel level
Slide control to the top position = maximum channel level
The channel fader of channels that are not in use should be slid right down. This reduces the possibility
of interference.
(8)
Crossfader
With the aid of this slide control, cross-fading takes place between the channels CH1 and CH2.
One channel is faded out on operating the slide control (becomes quieter). At the same time, the other
channel is faded in (becomes louder). With the cross-fader slide control in the centre position, both channels
are reproduced equally.
(9)
MIC socket
A dynamic microphone or a condenser microphone with its own power supply and 6.3 mm jack can be
connected to this socket.
(10)
PHONES connection
At this 6.3 mm jack bushing, a commercially available headphone with a 6.3mm jack bush can be connected.
(11)
MASTER LEVEL control unit
You can use this control to set the level at the MASTER OUTPUT (15).
12
13
All manuals and user guides at all-guides.com
14
15 16 17
16 17 18
25
Advertenties
Hoofdstukken
Inhoudsopgave
