Advertenties
Beschikbare talen
Beschikbare talen
4.4 Optional Connections
A number of optional connections are possible:
Undo the four screws at the front of the enclosure and remove the front panel.
4.4.1 Second Battery
The MultiPlus Compact has a connection (+) for charging a starter battery. For
connection see appendix A.
4.4.2 Temperature Sensor
The temperature sensor supplied with the product may be used for temperature-
compensated charging. The sensor is insulated and must be mounted on the
batteries minus pole. Default output voltages for Float and Absorption are at 25 °C.
In adjust mode temperature compensation is disabled.
15.0
14.5
14.0
13.5
13.0
Volts
12.5
12.0
11.5
11.0
10.5
10.0
0
5
4.4.3 Remote Control panel & remote on/off switch
The product can be remotely controlled in two ways:
- With an external 3-way switch
- With a Multi Control Panel
Please see section 5.5.1. for appropriate DIP switch settings.
4.4.4. Programmable relay
The MultiPlus is equipped with a multi-functional relay that by default is
programmed as an alarm relay. The relay can be programmed for all kinds of other
applications however, for example to start a generator (VEConfigure software
needed).
Near the connection terminals an LED illuminates when the relay is activated (refer
to S, see appendix A).
12
10 15 20 25 30 35 40 45 50 55 60
Battery temperature
30
29
28
27
26
Volts
25
24
23
22
21
20
Advertenties
Gerelateerde Handleidingen voor Victron energy MultiPlus Compact 12/2000/80-30 230 V
Gerelateerde Producten voor Victron energy MultiPlus Compact 12/2000/80-30 230 V
- Victron energy Phoenix Inverter Compact 12/1200
- Victron energy Phoenix Inverter 12/1300
- Victron energy Phoenix 12/3000
- Victron energy MultiPlus-II 12/3000/120-50
- Victron energy MultiPlus Compact 12/800/35-16
- Victron energy Smart BatteryProtect 12/24V-65A
- Victron energy Smart BatteryProtect 12/24V-100A
- Victron energy Smart BatteryProtect 12/24V-220A