Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
For HG06586D: Place the mounting plate
on the ground then fixed it with earth spikes
(see fig. A).
Further steps for both types of installation:
For HG06586A, HG06586B, HG06586C:
Attach stand pipe
5
spike
and tighten the fixing screw
1
the stand pipe
to the stand
5
Hint: Never install the fixing screw
the hole of stand pipe
the surface of the stand pipe
Press the interlock
9
LED tree
to stand pipe
7
For HG06586D: Screw the stand pipe
into mounting plate
to stand pipe
(see fig. B).
5
Bend the individual branches of the LED tree
to the desired shape (see fig. C). Remind not to
bend all the branches just to one side (see fig. E).
The 10 m lead wire
hand when first use. Insert the connector of the
10 m lead wire
into the socket of the power
6
adapter
and tighten the screw connection,
4
in order to prevent moisture from penetrating
inside. Pay attention to the sealing ring. Then
plug the power adapter
(see fig. D).
Use the velcro cable fastenings
the 10 m lead wire
HG06586A, HG06586B, HG06586C)
(see fig. F).
Timer function
The timer button
8
1 x push of the button:
The product lights up continuously.
2 x push of the button:
The product lights up continuously for 6 hours and
then switches itself off for 18 hours. The product
will then switch on again for 6 hours at the allo-
cated time and then switch off for 18 hours.
Note: The timer button
timer function has been activated.
to the stand
or ground
3
if mount
2
(see fig. A1-2).
3
though
2
but only fixed it on
5
(see fig. A2).
5
of stand pipe
and attach
5
(see fig. B).
5
5
then attach LED tree
3
must be unwound before-
6
into a socket
4
to secure
10
along the pipe (for
6
has three functions:
lights up when the
8
3 x push of the button:
3
The product is switched off.
1
Cleaning and care
SHOCK! First pull the power adapter
socket.
SHOCK! For reasons of electrical safety the
product must never be cleaned with water or other
liquids or immersed in water.
Do not use any solvents, petrol or similar items.
This would damage the product.
7
Only a dry, lint-free cloth should be used for
cleaning.
7
Easy to clean for heavy soiling, with a slightly
damp cloth.
Disposal
The packaging is made entirely of recyclable mate-
rials, which you may dispose of at local recycling
facilities.
Observe the marking of the packaging
materials for waste separation, which
b
a
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics/20–22: paper and fibre-
board/80–98: composite materials.
Contact your local refuse disposal au-
thority for more details of how to dis-
pose of your worn-out product.
To help protect the environment, please
dispose of the product properly when it
has reached the end of its useful life and
not in the household waste. Information
on collection points and their opening
hours can be obtained from your local
authority.
DANGER OF ELECTRIC
out of the
4
DANGER OF ELECTRIC
GB/IE/NI
9
Advertenties
Hoofdstukken
Inhoudsopgave
