Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Avoid the danger of
death from electric shock!
Before use, ensure that the power adapter is
connected to mains voltage (220–240 V∼).
Before connecting the product to the 10 m lead
wire
you should always check the product
6
and the 10 m lead wire
Never use the product if you discover that it is
damaged in any way.
This 10 m lead wire
nonreplaceable. Hence if it becomes damaged
you must dispose of the entire product.
This product does not contain any parts which
can be serviced by the user. The LEDs cannot
be replaced.
Only use the product with the supplied
power adapter
4
DS-310DC0360Hs-IP44); all warranty claims
will otherwise expire.
Never open any of the electrical parts or insert
any kind of object into them.
Protect the 10 m lead wire
mechanical loads and hot surfaces.
Do not install with sharp fasteners or nails.
Always unplug the power adapter
the socket before installation, dismantling or
cleaning.
Never touch the power adapter
LED tree
itself with wet hands.
7
The product must not be electrically connected
to another set of lights.
If the product is not in use for any length of
time (e.g. holidays), disconnect it from the
power supply.
If you have any questions about the product or
are unsure about any of its aspects, please
seek the advice of an electrical equipment
specialist.
Please note that the power adapter
to draw a small amount of power even if the
product is turned off as long as the power
adapter
is plugged into a power outlet.
4
To switch the product off completely, unplug
the power adapter
The LEDs are not replaceable.
8
GB/IE/NI
for any damage.
6
of the LED tree
6
7
for the type (Model No.
from sharp edges,
6
from
4
or the
4
continues
4
from the socket.
4
If the LEDs fail at the end of their lives, the entire
product must be replaced.
The LED driver can only be replaced by a
professional.
Never plug the light chain directly into a
220–240 V ~ supply.
WARNING! This product must not be used
without all gaskets being properly installed.
use the product in explosive atmospheres where
is
flammable vapours, gases or dusts are present.
Do not expose the product to any strong
vibrations or heavy mechanical stresses.
Make sure the10 m lead wire
down in areas where lawn mowers, trimmers,
scissors or similar cutting tools are used.
that, when the LED tree
mounting plate
also removed, so that they do not present any
risk (e.g. risk of stumbed by the mounting plate
and ground spike).
The twigs are made with metal wire, which can
cause scratches or discoloration to delicate sur-
faces.
Installation
Note: Remove all packaging materials from the
product.
Remove the individual parts from the packag-
ing and mount the product according to figures
A–E. The site for the LED tree
lected in a way that it is erected on a solid,
level and vibration-free base. Anchor the LED
tree
firmly to the ground and make sure that
7
the tree is stable!
Assembly indoor: Place the mounting
plate/stand
HG06586D, you may use the sticker
cover the holes for the earth spikes
mounting plate
Installation outdoor (see fig. A1):
For HG06586A, HG06586B, HG06586C:
Anchor ground spike
RISK OF EXPLOSION! Do not
is not laid
6
RISK OF INJURY! Make sure
is removed, the
7
and the ground spike
3
must be se-
7
on the selected site. For
3
1
.
3
to the ground.
1
are
1
to
11
in the
Advertenties
Hoofdstukken
Inhoudsopgave
