Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Powerboost function
The Powerboost function can be used to heat large amounts of
water more quickly than the power level Š.
Limitations on use
Induction hotplates (1 and 4) include this function, see
diagram. The Powerboost function is available provided that the
other induction hotplate is not turned on. If this is not the case,
the › and Š symbols will flash on the selected hotplate display;
then the power level will be automatically set to Š.
Time program function
This function may be used in two different ways:
to automatically switch off a hotplate
■
as a timer
■
Turning off a hotplate automatically
The hotplate turns off automatically once the selected time has
elapsed.
Program the cooking time.
The hob must be switched on:
Select the desired hotplate and power level.
1.
Press the 3 symbol. The Ú indicator on the hotplate lights
2.
up. ‹‹ is displayed on the time program function display.
Press the + or - symbol. The basic setting appears:
3.
+ symbol: 30 minutes.
- symbol: 10 minutes.
Press the + or - symbol until the required cooking time
4.
appears.
After a few seconds, the cooking time begins to elapse.
Note: The same cooking time can be automatically
programmed for the all the hotplates. The programmed time
passes independently for each of the hotplates.
The Basic settings chapter provides information on
automatically programming the cooking time.
Changing or cancelling the time
Selecting the hotplate . Press the 3 symbol and change the
cooking time with the + or - symbols, or set to ‹‹.
To activate
Select a hotplate.
1.
Press the › symbol.
2.
The › indicator lights up.
The function should be activated.
To deactivate
Select a hotplate.
1.
Press the › symbol.
2.
The › indicator will no longer appear and the hotplate will
return to the power level Š.
The function will be deactivated.
Note: In certain circumstances, the Powerboost function may
turn off automatically in order to protect the electronic
components inside the hob.
Once the time has elapsed
The hotplate switches off. A beep sounds and in the time
program function display ‹‹ appears for 10 seconds.
The Ú indicator on the hotplate lights up. Pressing the 3
symbol turns off the indicators and stops the beeping.
Notes
If cooking times have been programmed for various
■
hotplates, the time programming function always displays the
time for the selected hotplate.
Any cooking time can be programmed for up to 99 minutes.
■
The timer
The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. This function does not
automatically switch off a hotplate.
How to program
The timer can be selected in two different ways:
1.
If you have selected the hotplate: press the 3 symbol
■
twice.
If you have not selected the hotplate: press the 3 symbol.
■
The Ú indicator next to the W symbol lights up. ‹‹ is
displayed on the time program function display.
Press the + or - symbol. The basic setting appears.
2.
+ symbol: 10 minutes.
- symbol: 5 minutes.
Set the desired time using the + or - symbols.
3.
After a few seconds, the time will start to elapse.
Changing or cancelling the time
Press the 3 symbol various times until the Ú indicator next to
the W symbol lights up. Change the time or set to ‹‹ with
the + or - symbols.
Once the time has elapsed
A warning signal sounds. ‹‹ is displayed on the time program
function display. After 10 seconds the indicators turn off.
Pressing the 3 symbol turns off the indicators and stops the
beeping.
33
Advertenties
Hoofdstukken
Inhoudsopgave
