Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
UK
6.1. Initial startup of the heat pump
1. Checks to be performed before starting the heat pump
• The pool hose connections must be tight,
• The unit must be standing upright, be stable and be on a completely level surface.
• The power supply cable must not be exposed to sharp or hot objects
2. Additional checks must be performed by a qualified technician:
• The function of all safety components must be checked.
• Check that all metal elements are correctly earthed.
• The power connection and fitting of the electric power cable must be checked
Important:
Incorrect installation can cause overheating and will void the warranty.
7.
Instructions for use
The buttons and their functions
Press the following buttons and combinations in order to:
138
Press the button to start or turn off the heat pump
Press the "Up" or "Down" button to set the water temperature
Press shortly the "Up" and "Down" button at the same time to check the "water
in" temperature, "water out" temperature and set temperature.
Use the buttons to navigate in the advanced settings
Press the button to change the working mode: Powerful, Silent and Smart. The
default mode is Smart mode
Is also used to save settings
Press the settings button for 2 seconds to enter the advanced settings
Use the settings button to select options and to exit
MV-1401-1402-1403-1404-10-2021 . © All rights reserved Swim & Fun A/S
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
