Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
GB
11. Selecting the Spray Setting
(WallPerfect I-Spray spray attachment)
WARNING! Danger of injury! Never pull the trigger guard while adjusting
the air cap.
2 different spray jet shapes can be set by turning the adjustment ring (fig. 4, 1)
Fig. 5 A = vertical flat jet
Fig. 5 B = horizontal flat jet
12. Selecting the Spray Setting
(PerfectSpray spray attachment)
WARNING! Danger of injury! Never pull the trigger guard while adjusting
the air cap.
With the union nut (fig. 6, 1) slightly unscrewed, turn the air cap (2) to the desired
spraysetting position (arrow). Then tighten the union nut.
Fig. 7 A = vertical flat jet
Fig. 7 B = horizontal flat jet
Fig. 7 C = circular jet
13. Adjusting the Material Volume (Fig. 8)
Set the material volume by turning the regulator on the trigger guard of the spray gun.
lower material volume
higher material volume
28
for horizontal surfaces
for vertical surfaces
for horizontal surfaces
for vertical surfaces
for corners, edges and hard-to-reach surfaces
turn anti-clockwise (-)
turn clockwise (+)
Flexio 580 I-Spray
Advertenties
Hoofdstukken
Inhoudsopgave
