Download Inhoudsopgave Inhoud Print deze pagina

Care And Cleaning; General Information; Cleaning The Hob; Troubleshooting - ZANKER KEV6043FBB Gebruiksaanwijzing

Verberg thumbnails Zie ook voor KEV6043FBB:
Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

7. CARE AND CLEANING

WARNING!
Refer to Safety chapters.

7.1 General information

• Clean the hob after each use.
• Always use cookware with clean bottom.
• Scratches or dark stains on the surface
have no effect on how the hob operates.
• Use a special cleaner applicable for the
surface of the hob.
• Use a special scraper for the glass.

7.2 Cleaning the hob

• Remove immediately: melted plastic,
plastic foil, sugar and food with sugar. If

8. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.
8.1 What to do if...
Problem
You cannot activate or operate
the hob.
Residual heat indicator does not
come on.
There is a dark area on
the multiple zone.
8.2 If you cannot find a solution...
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre. Give the data from the rating
plate. Make sure, you operated the hob
correctly. If not the servicing by a service
20
ENGLISH
not, the dirt can cause damage to the hob.
Take care to avoid burns. Put the special
scraper on the glass surface at an acute
angle and move the blade on the surface.
• Remove when the hob is sufficiently
cool: limescale rings, water rings, fat
stains, shiny metallic discoloration. Clean
the hob with a moist cloth and non-
abrasive detergent. After cleaning, wipe
the hob dry with a soft cloth.
• Remove shiny metallic discoloration:
use a solution of water with vinegar and
clean the glass surface with a moist cloth.
Possible cause
The fuse is blown.
The zone is not hot because it
operated only for a short time or
the sensor is damaged.
It is normal that there is a dark
area on the multiple zone.
technician or dealer will not be free of charge,
also during the warranty period. The
instructions about the Service Centre and
conditions of guarantee are in the guarantee
booklet.
Remedy
Make sure that the fuse is the
cause of the malfunction. If the
fuse is blown again and again,
contact a qualified electrician.
If the zone operated sufficiently
long to be hot, speak to an Au‐
thorised Service Centre.

Advertenties

Inhoudsopgave
loading

Inhoudsopgave