Daily Use - ZANKER KEV6446XXK Gebruiksaanwijzing
Verberg thumbnails
Zie ook voor KEV6446XXK:
- Gebruiksaanwijzing (56 pagina's) ,
- Gebruiksaanwijzing (56 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
10
Heat setting displays
Display
-
Residual heat indicator
Warning!
The risk of burns from residual
heat!
Daily use
Activation and deactivation
Touch
for 1 second to activate or deactivate the ap-
pliance.
Automatic Switch Off
The function deactivates the appliance
automatically if:
• All cooking zones are deactivated (
• You do not set the heat setting after you activate the
appliance.
• You spill something or put something on the control
panel for more than 10 seconds, (a pan, a cloth,
etc.). Remove the object or clean the control panel.
• You do not deactivate a cooking zone or change the
heat setting. After some time
appliance deactivates. See below.
• The relation between heat setting and times of the
Automatic Switch Off function:
•
-
— 6 hours
•
-
— 5 hours
•
— 4 hours
•
-
— 1.5 hours
18
All manuals and user guides at all-guides.com
sensor field
The cooking zone is deactivated.
The cooking zone operates.
There is a malfunction.
A cooking zone is still hot (residual heat).
Lock / The Child Safety Device operates.
The Automatic Switch Off operates.
).
comes on and the
function
To activate and deactivate the outer ring.
Description
The heat setting
Touch
to increase the heat setting. Touch
decrease the heat setting. The display shows the heat
setting. Touch
and
vate the cooking zone.
Activation and deactivation of the outer rings
You can adjust the surface you cook to the dimension
of the cookware.
To activate the outer ring touch the sensor field
. The indicator comes on.
Do the procedure again to deactivate the outer ring.
The indicator goes out.
Automatic Heat Up
You can get a necessary heat setting in a shorter time
if you activate the Automatic Heat Up function. This
function sets the highest heat setting for some time
(see the diagram), and then decreases to the necessa-
ry heat setting.
To start the Automatic Heat Up function the cooking
zone must be cold (no
the cooking zone again and again until the necessary
heat setting comes on. After 3 seconds
in the display.
To stop the function, touch
to
at the same time to deacti-
in the display). Touch
comes on
.
/
of
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
