Download Inhoudsopgave Inhoud Print deze pagina

At The End Of The Wash Cycle; Cycle Selection Table - ETNA EVW7962WIT Gebruiksaanwijzing

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

OPERATION

At the end of the wash cycle

Cycle selection table

Cycles EVW7947
Eco
(EN50242)
Rapid
Rinse
Attention!
A cycle that has already begun can only be changed in the start-up
phase. After this, the detergent will be sprayed all over the dishes or
the machine may have already pumped out the water. In that instance,
you must refill the detergent compartment (see section on Dishwasher
detergent).
Warning!
It is dangerous to open the door completely when washing, because the hot
water may scald you.
Once the wash cycle has completed, an audible signal will sound for
eight seconds.
1. Switch the appliance off using the On/Off button.
2. Open the door.
3. Wait a few minutes before unloading the dishwasher. The dishes
and cutlery will still be very hot immediately following the end of the
cycle. There is a chance that dishes may break as a result of the
heat. Moreover, the dishes dry better when allowed to stand for a
few minutes.
Information
Standard daily cycle for normally soiled
loads, such as plates, glasses and
lightly soiled pans.
A shorter wash for lightly soiled loads
that do no need drying.
To rinse dishes that you plan to wash
later that day.
Cycle process
Pre-wash
Wash (50 °C)
Rinse (65 °C)
Drying
Wash (40 °C)
Rinse
Rinse (40 °C)
Pre-wash
Time in min.
160/165
30
8
GB 11

Advertenties

Hoofdstukken

Inhoudsopgave
loading

Deze handleiding is ook geschikt voor:

Evw7962wit/e01Evw7962

Inhoudsopgave