Advertenties
Beschikbare talen
Beschikbare talen
TECHNICAL INFORMATION
FOR THE INSTALLER
Installation, adjustments of controls and
maintenance must only be carried out by a
qualified engineer.
The appliance must be correctly installed in
conformity with current law and the
manufacturer's instructions.
Incorrect installation may cause damage to
persons, animals or property for which the
Manufacturer
shall
responsible.
During the life of the system, the automatic
safety or regulating devices on the appliance
may only be modified by the manufacturer or
by his duly authorized dealer.
IMPORTANT!
A perfect installation, adjustment or
transformation of the cook top to use
other gases requires a QUALIFIED
INSTALLER: a failure to follow this rule
will void the warranty.
FIG. 7
INSTALLATION
not
be
considered
COMPLY WITH THE DIMENSIONS
A
5F (90)
833
3) INSTALLING THE HOT PLATE
Check that the appliance is in a good condition after
having removed the outer packaging and internal
wrappings from around the various loose parts. In
case of doubt, do not use the appliance and contact
qualified personnel.
Never leave the packaging materials (cardboard,
bags, polystyrene foam, nails, etc.) within
children's reach since they could become
potential sources of danger.
The measurements of the opening made in the top of
the modular cabinet and into which the hot plate will be
installed are indicated in either fig. 7. Always comply
with the measurements given for the hole into which
the appliance will be recessed (see fig. 7 and 8).
The appliance belongs to class 3 and is
therefore subject to all the provisions
established by the provisions governing such
appliances.
B
C
475
62.5
60
(in mm)
D
E
62.5
73.5 min.
FIG. 8
Advertenties
