15.4.3
Temperature Mode
Press the button 6 (Temp.) to select the temperature. The preset temperature stage
"120°C" is selected and the device turns on.
You can change the setting with + / - buttons at any time in a range from 60 – 240°C.
(Temperature stages: in 10 °C steps).
The temperature is measured by a sensor below the glass ceramic plate, therefore the
displayed temperature can deviate from the temperature in the pot. Different cookware
can lead to different results of measurement.
► You can switch to power mode with button 5 (Level)
► Please note that the functions level, keep warm and temperature can be chosen as
alternative. The most recently selected function is active.
► In case of grilling or cooking deep fry food we would advise you to use the function
"Temperature" as in this case you can use temperatures up to 240°C.
15.4.4
Keep Warm Mode
With button 4 (Keep Warm) you can reheat your food or keep it warm immediately after
the cooking. The device heats your food up to round about 70 °C.
15.4.5
Timer
Timer function. Press button 7 (Timer).
operating time up to 23 hours 59 minutes (in 1 minute steps). Once the time is up, an
acoustic signal sounds and the device automatically goes into standby mode.
Please note
► During timer operation, you can change the duration at any time with the +/- buttons.
With the memory function of the device, the power stage or temperature settings
remain unchanged here.
15.4.6
Switching Off
When you switch off the device via "On/Standby" and the temperature of the cooker plate
surface is lower than 50°C, the display shows „L". When the temperature of the cooker
plate surface is over 50 °C, it is displaying „H".
► Do not place any empty cookware on the ceramic field. Heating an empty pot or pan
activates the overheating protection and the device turns off.
► The use of accessories and spare parts not recommended by the manufacturer may
lead to damage on the device and injuries.
Please note
Please note
With the +/- buttons, you can now select the
41