Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
13.4 Disposal of the packaging
The packaging protects the device against damages during transit. The packaging
materials are selected in accordance with environmentally compatible and recycling-
related points of view and can therefore be recycled.
Returning the packaging back to the material loop saves raw materials and reduces the
quantities of accumulated waste. Take any packaging materials that are no longer required
to "Green Dot" recycling collection points for disposal.
► If possible, keep the original packaging for the device for the duration of the guarantee
period of the device, in order that the device can be re-packaged properly in the event
of a guarantee claim.
13.5 Setup
13.5.1
Setup location requirements:
In order to ensure the safe and trouble-free operation of the device, the setup location
must fulfil the following prerequisites:
The appliance must be positioned on a solid, even, horizontal and heat-resistant base
with sufficient load-supporting capacity for the appliance itself plus the heaviest
anticipated cooking contents.
The induction cooktop must not be operated on a base with an iron or steel content, as
this can heat up considerably.
Select an installation location where children cannot reach the appliance's hot surface.
The appliance is not intended as a built-in appliance.
Do not set up the device in a hot, wet or extremely damp environment or near
flammable material.
Do not set up the induction cooktop in the vicinity of appliance and objects which react
sensitively to magnetic fields (e.g.: Radios, televisions, cassette recorders, etc.).
To operate correctly, the appliance requires a sufficient flow of air. Leave a distance of
10 cm at each side (left and right).
The cool air is drawn in by the underside of the appliance. WARNING! Do not close the
ventilation openings in the device housing.
The electrical socket must be easily accessible so that the power lead can be
disconnected easily, in the case of an emergency.
The installation and assembly of this device in non-stationary setup locations (e.g. on
ships) must be carried out by specialist companies / electricians, provided they
guarantee the prerequisites for the safe use of this device.
13.5.2
Preventing Radio interference
The appliance can cause interference to radios, televisions or similar devices. Interference
can be removed or reduced using the following measures:
Place the radio, television etc. as far away from the appliance as possible.
Connect the appliance to a different socket, so that different electric circuits are being
used for the appliance and the receiver experiencing interference.
Use a correctly installed aerial for the receiver in order to ensure good reception.
Please note
36
Advertenties
Inhoudsopgave
