Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
46
Technical data
Problem
The dishes are wet.
The dishes are wet and matt.
Activating the rinse aid dispenser
1. Activate the appliance.
2. Make sure that the appliance is in setting mode.
3. Press and hold touchpad Delay and touchpad Start at the same time until the pro-
gramme indicators AUTO, PRO and SILENT flash.
4. Release touchpad Delay and touchpad Start.
5. Press touchpad Option.
• The programme indicators AUTO and SILENT go off.
• The programme indicator PRO continues to flash.
• The display shows the setting of the rinse aid dispenser.
6. Press touchpad Option to change the setting.
7. Deactivate the appliance to confirm.
TECHNICAL DATA
Dimensions
Water supply pressure
1)
Water supply
Capacity
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
All manuals and user guides at all-guides.com
Possible cause
The detergent can be the
cause.
The washing programme was
without a drying phase or with
a decreased drying phase.
The rinse aid dispenser is emp-
ty.
The multitab function is on
(this function automatically
deactivates the rinse aid dis-
penser).
The rinse aid dispenser is off.
The rinse aid dispenser is on.
Width
Height
Depth
Minimum
Maximum
Cold water or hot water
Place settings
Possible solution
Use a different brand of deter-
gent.
For better drying results, keep
the door ajar for some minutes.
Fill the rinse aid dispenser with
rinse aid.
Activate the rinse aid dispenser.
596 mm
818 - 898 mm
575 mm
0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
maximum 60 °C
12
Advertenties
Hoofdstukken
Inhoudsopgave
