Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Manual adjustment
Electronic adjustment
1. Press the on/off button to activate
the appliance. Make sure that the ap-
pliance is in setting mode, refer to
"Setting and starting a programme".
2. Press and hold, at the same time, De-
lay and Option until the indicators of
,
start to flash.
3. Press Program,
• The indicators of
go off.
6.2 Filling the salt container
and
and
Turn the water hardness dial to the posi-
tion 1 or 2.
• The indicator of
ues to flash.
• The display shows the current set-
ting of the water softener, e.g.
= level 5.
4. Press Program again and again to
change the setting.
5. Press the on/off button to deactivate
the appliance and to confirm the set-
ting.
1.
Turn the cap counterclockwise and
open the salt container.
2.
Put 1 litre of water in the salt con-
tainer (only for the first time).
Fill the salt container with dishwash-
3.
er salt.
4.
Remove the salt around the opening
of the salt container.
5.
Turn the cap clockwise to close the
salt container.
CAUTION!
Water and salt can come out
from the salt container when you
fill it. Risk of corrosion. To pre-
vent it, after you fill the salt con-
tainer, start a programme.
ENGLISH
27
contin-
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
