You can change the door from
right-hinged to left-hinged or vice versa
yourself
Illustrations 14-19 show how easy it is
to change the doors from right-hinged
to left-hinged - or vice versa. (Changing
the door from left-hinged to right-hinged
is done in the same way, but opposite).
The refrigerator must be switched off
and emptied completely.
·
Remove the two screws in the
hinge top on the righthand side
of the cabinet. (14)
·
Lift the refrigerator door slightly
and take the door and upper
hinge off by pulling the door
towards you.
·
Remove the dummy hinge
from the opposite side by
unscrewing the two screws.
(15)
·
Reverse the dummy hinge and
refit it on the opposite side of
the cabinet using two screws.
·
Tilt the refrigerator to an angle
of max. 45° and unscrew the
lower hinge. This is done by
removing the two screws
holding the bottom hinge on
the cabinet underside. (16)
·
Remove the lower dummy
hinge in the opposite side in
the same way as the upper
dummy hinge was removed.
(17)
All manuals and user guides at all-guides.com
15
·
Reverse the dummy hinge and
refit it on the opposite side of
the cabinet.
·
Reverse the upper righthand
hinge and refit it in the lower
lefthand corner of the cabinet.
·
Place the cabinet in the correct
position again.
·
Remove the door handle by
removing the screws. (18)
·
Reverse the lower righthand
hinge and refit it on the top
part of the door in the left side
of the cabinet. Push the door
into position and slide the
upper hinge into the upper
lefthand hinge casing. Tighten
the two screws. Remember to
adjust the hinges.
·
Remove the screws on the
righthand side of the door and
screw them onto the left side of
the door. Use the screws from
the left side to attach the
handle to the righthand edge of
the door. (19)
GB