Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
same temperature on all levels of the
cooler.
After being turned on, the ventilator
works in a cycle function except when
the cooler door is opened.
Display brightness adjustment
By pressing and holding the pushbutton
(10) and
-
pressing at the same time the
pushbutton p(6), the display bright-
ness increases,
-
pressing at the same time the
pushbutton q (7), the display bright-
ness decreases.
When adjusting the display brightness,
the display shows the following
indications:
1.8 – minimum brightness
2.8 – medium brightness
3.8 – maximum brightness
(manufacturer's setting).
Alarms
Normal use of the refrigerator may cause
different situations leading to interruption
of various functions and unstable
operation of the entire equipment as a
consequence. These interruptions are
shown on the display as the alarm code
(an E followed by a number) and signalled
by the acoustic alarm. In case there will
be several faults the alarm codes shall be
displayed in turn.
Alarm codes
E1 – temperature sensor fault in the
refrigerator's chamber
E4 – door is open
E1
One of the temperature sensors has been
damaged. Call technical service. The
built-in emergency program maintains the
admissible temperature until the fault will
All manuals and user guides at all-guides.com
be eliminated by the authorized technical
service.
E4
The door of the refrigerator's chamber
has been opened for more than 3
minutes. The alarm code disappears
when the door is closed.
Interrupting an alarm
The acoustic alarm can always be
interrupted by opening the door and/or
pressing any push-button.
The alarm code E4 can be cancelled by
pressing for 7-8 seconds at the same
time the push-buttons.
The exception: in case of the alarm E1 it
is possible to cancel the alarm only after
replacing damaged sensors.
In such cases please contact Gram
Service Center.
9
GB
Advertenties
Hoofdstukken
Inhoudsopgave
