Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Hood Operation - Model DM 8700 - DD 8770
Switching on the hood - Fig. 3
The control ball is a balancer switch.
Pressing the control ball repeatedly towards the right switches on the
hood and you may select the extraction level desired, pressing once
again on the right the hood switches off.
Switching on the light - Fig. 3
Press the control ball towards the left :
once for subdued lighting,
once again for full lighting,
press again to switch off the light.
press towards the
right to switch on the
hood
Grease and charcoal filter maintenance
indicator
The air duct, in this hood, is provided with a device that signals when
the filter requires cleaning or changing .
Led signal for grease filter
The LED signal flickers (flickering green light) when the grease filter
requires cleaning, occurs at about 40 operating hours.
Carefully note the device for grease filter maintenance!
Led signal for charcoal filter
The LED signal flickers (flickering orange light) when the grease filter
requires cleaning, occurs at about 160 operating hours.
Re-setting the saturation signal
After cleaning or replacing the filter, select the intensive speed (the
control ball lights up with a red flashing light), press again and hold
pressed for about 3 seconds until a 'bip' sound indicates the reset.
70
All manuals and user guides at all-guides.com
Fig. 3
press towards the left
to switch on the light.
Advertenties
Hoofdstukken
Inhoudsopgave
