Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Description of the Appliance
• The cooker hood is designed to extract unpleasant odours
from the kitchen, it will not extract steam.
• The hood is supplied as an extractor unit and can also be used with
a recirculation mode by fitting a charcoal filter.
• You will need an original charcoal filter for this function (Available
from your local Service Force Centre).
• Only for HD 6470: The cooker hood is supplied ready for use as a
recirculation hood and may be used for extraction by removing the
charcoal filter which has been fitted inside the
cooker hood.
Extraction mode
• In this mode fumes are extracted to the
outside via a hose connected to the coupling
ring A. Fig. 1.
• In order to obtain the best performance the
hose should have a diameter equal to the
outlet hole.
Should there already be a pipe of diameter 125
or 120 mm that ducts to the outside through
the walls, it is possible to use the 150/125-120
mm reduction flange provided. In this case the
hood will be slightly noisier.
Recirculation mode
• The air is filtered through a charcoal filter and
returned to the kitchen.
• You will need an original charcoal filter for the
recirculation mode. (See Special Accessories).
• Assemble the deflector (3 parts): the three
parts must be fixed with 2 screws Ø 3.5 13 mm,
the extension of the deflector is adjustable and
must correspond to the width of the chimney flue
support, to which it must be fixed.
Fix the deflector using 4 screws Ø 2,9x6.5 mm.
Fig. 2.
• Optionally, the position of the chimney elements
can be changed.
When using the hood in the recirculation mode
the chimney must be fixed at the top, with the
air outlet grill at the side.
68
All manuals and user guides at all-guides.com
coupling ring
Fig. 1
=
Fig. 2
=
Advertenties
Hoofdstukken
Inhoudsopgave
