Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
2.7 Use of the workstation frame
Do not allow children to use the workstation frame unsupervised. Children may be unaware
•
of the dangers presented by the workstation frame. They would be in serious danger of injur-
ing themselves, possibly even with fatal consequences. Further adjustment must then be im-
possible as a safeguard against use by children.
The workstation frame must only be used in appropriate areas (see Section 4 Technical
•
Specifications).
Do not use the workstation frame on an uneven surface. In such conditions it will not be
•
steady.
Never exceed the maximum load on the workstation frame (see Section 4 Technical Specifi-
•
cations).
2.8 Specific dangers
When adjusting the height of the frame there is danger of injury. Make sure that there is no-
•
one else in the immediate surroundings of the frame.
When assembling the workstation frame, make sure there is ample space to avoid collisions
•
(i.e. inclination of roof, fixed objects, filing cabinets, waste-paper bins etc.) in all imaginable
directions.
Make sure there is ample space to avoid collisions if there are objects on the work surface
•
such as computers or computer peripherals.
Make sure there is clearance of at least 25 mm from all other furniture, all around the work-
•
2.9 In an emergency
Stop using the workstation frame at once if you notice anything unusual (strange sounds
•
etc.).
Have the workstation frame repaired by specialists. Refrain from using the workstation
•
frame until it has been successfully repaired.
2.10 Maintenance and upkeep
The workstation frame and its components are low-maintenance items and need no special
•
regular maintenance.
Do not perform any repairs on the work surface or other components yourself.
•
Do not alter the construction of the work surface or its frame.
•
Any faulty components removed must be replaced with new, original components from the
•
manufacturer. Use only original replacement parts made by the manufacturer. Have any such
work carried out by a specialist, making reference to this Assembly/operating manual.
2.11 Cleaning
Dust the workstation frame once a week with a dry cloth.
•
Clean the workstation frame with a damp cloth and a weak solution of cleaner once a fort-
•
night.
2.12 Persistent risks
This workstation frame has been built to the state of the art and to recognized safety regulations.
Nonetheless, its use may constitute a risk to the health and safety of users or third parties, damage
to the workstation frame or to other items. The workstation frame must be used only:
for the purpose for which it was intended.
•
if it is completely safe so to do.
•
6
Advertenties
Hoofdstukken
Inhoudsopgave
