Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
2 Safety Information
2.1 Symbols/warnings
The assembly/operating manual uses the following terms and signs to indicate dangers:
This symbol indicates an immediate threatening situation for any person's life
or health. Failure to adhere to such information may have serious consequences
for health, or could even result in life-threatening injury or death.
This symbol indicates important information. Failure to adhere to such infor-
mation could lead to damage to the workstation.
2.2 Symbols used on the workstation frame
Do not place objects or parts of the body under the workstation frame or be-
tween the cross members. This could cause serious injury.
Do not exceed the maximum permitted load on the workstation frame. Over-
loading could lead to breakage and serious injury as a consequence.
2.3 Organizational measures
The workstation frame can best be assembled by two people. Turning the frame, once the
•
work surface has been fitted, is a task in particular which requires two people!
2.4 Informal safety measures
Keep the assembly/operating manual in the place where the workstation frame is used at all
•
times.
Make sure that all safety information on the table (see Section 2.2, Symbols used on the
•
workstation frame, page 5) is legible, replacing the same if necessary.
2.5 Note for those assembling the workstation
The workstation must be assembled/worked on by persons over the age of 16.
•
The persons referred to above must have read and understood the assembly/operating manu-
•
al.
2.6 Transport and assembly
The workstation frame must be moved by two persons only, and in such cases must be re-
•
tracted.
Do not drag or pull the workstation frame over the floor.
•
Assemble the workstation frame with the supplied tools only. They are the only tools which
•
ensure that the screws can be tightened to the correct torque.
5
Advertenties
Hoofdstukken
Inhoudsopgave
