Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
English
1 1
3- Choose the programme you want for this day with
pressing
.
1 1
4- The programme assigned to the second day of the week (Tuesday) will
flah. Repeat the procedure described previously (in point 3) for each day of
the week.
1 1
5- Once you have chosen a programme for each day, confirm your selection
by pressing
. The days of the week will succesively scroll on display with
the programmes that you set for them (P1, P2, P3, CONF or ECO). To exit the
programme viewing mode, press
Viewing the programmes that you have selected
- From Auto, Comfort, Eco or Frost protection mode, press
Press
twice, the programme for each day of the week (Comfort, Eco,
P1, P2 or P3).
- To exit the programme viewing mode, press
• Manual and temporary exemption from a running programme
This function allows you to change the setting temperature temporarily until
the next scheduled change in temperatre or the transition to 00:00.
Example :
1- The device is in Auto mode, the running programme is Eco 15,5°C.
2- By pressing
or
, you can change temporarily the desired
or
. Save by
1
2
twice.
for 5 seconds.
twice.
3
temperature up to 18°C .
Note: The cursor corresponding to the operation mode, i.e Eco mode in
our example, is blinking during the duration of the temporary derogation.
3- This change will be automatically cancelled at the next change of
programme or transition to 00:00.
11.10 Open window detection, energy savings
• Important information about the open window detection
Important: the open window detection is sensitive to temperature variations.
The device will react to the window openings in accordance with different
parameters: temperature setting, rise and fall of temperature in the room,
outside temperature, location of the device. If the device is located close to
a front door, the detection may be disturbed by the air caused by opening
door. If this is a problem, we recommend that you disable the automatic
mode open window detection. You can, however, use the manual activation .
• Overview
Lowering temperature cycle by setting frost protection during ventilation
of a room by opened window. You can access the open window detection
from the Comfort, Eco and Auto modes.
- Automatic activation, the lowering temperature cycle starts as soon as
the device detects a temperature change.
- Manual activation, the cycle of lowering temperature starts by pressing
a button.
- 28 -
3 3
3
1
2
Legend
= the favourite location
= another location
Cod. 1910000000276 - nv01
Advertenties
Hoofdstukken
Inhoudsopgave
